PROtect tapes are a broad range of protective tapes for racing yachts and dinghies. All products have been engineered by polymer and adhesive specialists supported by professional sailors to provide effective solutions to chafing, abrasion, scratches, ageing and wear.
The PROtect Laser Kit contains a Mast Disk made from 1mm thick UHMWPE (Teflon) to prevent wear in your mast step. It also contains a selection of Chafe tapes (see listing below) for snug fit of top and bottom mast sections, deck abrasion from tiller, outhaul and centre board.
Chafe tapes are pressure sensitive tape using extremely high molecular weight polyethelene film with an aggresive acrylic adhesive. It has an very low coefficient of friction, is self lubricating and highly resistant to abrasion (15 times more resistant that carbon steel)!
What this all provides is the ability to keep your Laser in "as new" condition forever, keeping its re-sell value and also providing better performance of parts such as mast sections, outhaul and the centreboard. Go on, give your boat a treat!!!
2 disks - 65mm, 1mm thick Teflon disk for the mast step
2 stripes - 50mm wide for the mast step and mast deck
1 stripe - 17mm x 2m for the snug fit of the top mast section
1 stripe - 30mm x 2m for the snug fit of the top mast section
1 stripe - 34mm x 150mm for the deck abrasion from the tiller
1 stripe - 150mm x 300mm for the outhaul
5 squares - 30mm x 30mm for the centreboard case
A part supplied by a licensed manufacturer which is legal for use in all official International Laser Class Association events. Also compatible with parts for the LASER ®
LASER® and starburst/sun logo are registered trademarks owned by Velum Limited and currently licensed to the Laser Performance Group for use in Europe. Sailboats.co.uk is fully independent of both the Laser Performance Group and Velum Limited.