Laser Standard Mark II Sail Rig Package
Enter your destination to get a shipping estimate.
The Laser Standard MKII/Full Rig is what you will need if you're changing from a Radial or 4.7 Rig. The recommended weight for the Laser Standard/Full Sail is 60+Kg.
- Standard Lower Mast
- Standard MKII Folded Sail including Folded Sail Bag
- Batten Set MKII for use with the MKII sail only
- Number set
- Tell Tails
This is the Laser Standard Mark II sail everyone has been waiting for. The Mark II is more durable due to its bi-radial construction, it is manufactured out of longer lasting 4.5 ounce Dacron cloth with optimized sail patches and the new luff tube design is easier on the upper spars. Which has been approved by the Laser Class and ISAF for competition.
BI-RADIAL CONSTRUCTION- The radial panel structure of the Mark II sail attempts to best match the load paths expected while sailing. The intent was to make a sail that has the shape intended while offering improved durability.
LARGER WINDOW - A larger window increases safety by allowing sailors to visualize the race and see other boats better.
TAPERED BATTENS - A sail shape is not an even curve. To better match the designed sail shape, the Mark II sail uses tapered battens of varying stiffness so they will best match the sail shape where they are installed. Battens are not included with the sail and fit into Velcro fastened pockets.
LUFF TUBE MAST JOINT PATCH - A long standing gripe of Laser sailors is the crease that develops from the mast joint to the clew. The patch on the Mark II is designed to greatly reduce this crease by accommodating the factors that create the crease.
4.5 OZ. DACRON SAILCLOTH - The 4.5 oz cloth is chosen for the Mark II sails because its engineering supports radially designed sails best and has a cloth weight that offers improved durability while not being too heavy for light air conditions.
OPTIMIZED PATCHING - It is widely understood that the greatest loads on a sail are found at the corners. Without proper patching, large creases emanate from the corners. The best types of patches attempt to match the load path expected and with sufficient layers and size to best distribute the loads into the sail body. The Mark II patches are optimized into a radial design to match the load paths. Also notable is the tack patch that has components in the sleeve. This is designed to help the sail last longer under the stresses of high downhaul loads.
The Laser Standard Mark II sail is supplied folded with folded sail bag. Battens from the Standard cut sail CANNOT be used with this new sail and must be purchased separately.Read more
- Click Image to Zoom