Machine Screws Bolts M5 Countersunk

Name: Machine Screws Bolts M5 Countersunk
SKU: MG-60345-

Be the first to review this product

SKU: MG-60345-

Ask a question (1)

Product Name	Price	Qty
Machine Screw Countersunk Head M5 x 25mm (pack 4) (In Stock)	£1.80
Machine Screw Countersunk Head M5 x 40mm (pack 4) (In Stock)	£1.80
Machine Screw Countersunk Head M5 x 50mm (pack 4) (In Stock)	£2.60

Product Description

Details

Pan Head M5 Machine screws/bolts made from marine grade A4 stainless steel supplied with standard nuts and washers

Product Questions

How are screws and bolts measured - what size do I need?

Most dinghy/small boat fittings have either a 4mm fixing hole or a 5mm fixing hole. Screws (self tappers) are sized by gauge and Bolts (machine screws bolts) are sized by their metric sizes - 3mm, 4mm, 5mm etc
Please see the table below for metric and imperial comparisons

Inches	Metric	Screw Gauge i.e. self tapper	Bolt i.e. machine screw bolt
	3.00mm		M3
0.136"	3.45mm	No. 6	-
0.157"	4.00mm	-	M4
0.164"	4.17mm	No.8	-
0.192"	4.88mm	No.10	-
	5.00mm	-	M5
	6.00mm	-	M6

We try to list the fixing hole size where possible but it is not always available. As noted above its safe to assume that the fixing hole is at least 4mm for any modern fitting or more normally 5mm. A no.8 screw would fit into a 4mm fixing hole in a fitting.

Write Your Own Review

You're reviewing: Machine Screws Bolts M5 Countersunk
How do you rate this product? *